For my use of a RC product in a none RC way I took some rc4wd LEDs and put them in my wife's 4runner. The back light bulbs are known to blow. And being around $15 and a 2 hour round trip for them. I figure I was a wise choose to put the LEDS in. They were a little tricky to get in with the resistors but a little solder work and they were in the holders. They light the dash up nicely.
![Image](http://i1216.photobucket.com/albums/dd370/opiejudd/20160123_164454.jpg)
The LEDS are the ones lust to the left and right of the white connector
![Image](http://i1216.photobucket.com/albums/dd370/opiejudd/20160123_143034.jpg)
Another use I have found for RC products is as driver organizer.(And I hoping his summer to use it for some loose allen wrenches.) You take a stock axial plastic link and drill holes in and slip your drivers in. In my case I have my Lockedup drivers in them.
![Image](http://i1216.photobucket.com/albums/dd370/opiejudd/20160123_163546.jpg)